Some weeks ago I've build a full-featured XPhase for my father, DK1UO. He is sometimes affected by heavy interference from Plasma-TVs or similar scrap
The function of the XPhase is based on the fact that the interfering signal, received by an auxiliary antenna, is added phase-shifted to the signal received from the main antenna. When the phase-shift is more or less 180°, the interfering signal is canceled out.
My XPhase is based on the work of Hanns, DK9NL. A commercial versions can be found here under the name QRM-Eliminator. Google will provide you some futher informations.
Heute ist mein Bausatz vom Funkamateur für den Splitter/Combiner für den Frequenzbereich von 0,1-450MHz geliefert worden. Nun Bausatz ist ja schon fast übertrieben - vier Bauteile sind einzulöten; 1xCombinermodul + 3xBNC Buchsen.
Ich habe das Leistungsmessmodul von Oliver, DG7XO nachgebaut. Es wurde in zwei Versionen in der cqDL vorgestellt. Oliver hat mir freundlicherweise eine Platine geätzt und den AVR programmiert, so dass nur noch Löten und Mechanik angesagt war...
Saving parameter to EEPROM
I've discovered, that the value of the weighting feature is not saved to the EEPROM. I'Ve updated the Sketch.
All my changes in the sketch are surrounded with a conditional statement:
#ifdef DL2SBA...#endifand should be discovered easily.
Extensions
I've applied the following extension to my nanoKeyer:
- Powersupply
- Memory bank selection
- smaller code changes
Neu im Stall ist die kleine Morsetaste SQUEEKY von DK1WE
Ich habe schon länger nach einem externen Memory-Keyer Ausschau gehalten und mir auch mal den MasterKeyer von hamGadgets angeschaut. Für 200€ fand ich aber die mechanische Ausführung nicht so toll, wobei aber die Funktionsvielfalt schon wirklich beeindruckend ist - und eigentlich wollte ich auch mal wieder basteln 