Logbook for basic setup of Raspberry Pi 3

01 01 2018 11 04 47

For the main power distribution in my house, I also build a powersensor. The basic idea is the same as for this sensor. But the electric meter is already build into the distribution cabinet, so this power meter uses the so-called S0 bus of the power meter inside the cabinet.DSCF4078

This is my first power/voltage sensor I've build. It is based on an commercially available powermeter from B+G E-Tech. You can find them on eBay or their website. It provides a 90ms pulse for each Wh flown through it.6Q7A7842

The line voltage is measured using a simple transformer and a circuit based on the schematic from OpenEnergyMonitor. The software to measure the line voltage is also from OpenEnergyMonitor embedded into my sensor framework.

My MQTT server also has some basic systems management capabilities - means the MQTT server can emit the following data to the MQTT broker:

2014 CW (Morse Telegraphy) was added to the German Nationwide Inventory of Intangible Cultural Heritage.

Logo